The furnace for the application of high-antioxidant coating

appointment

 
A furnace for applying coatings consisting of antioxidant and evaporation deposition chambers. Base material (graphite or carbon / carbon) is placed in the deposition chamber, and a pre-evaporation chamber placed NaCl, ZrCl4, etc. Preheated and vaporized high temperature enters through conduit compound deposition chamber, is applied to the basic materials are obtained antioxidant coating.

TECHNICAL features

 
1. A furnace for vacuum coating has upper and lower chambers in which the deposition temperature is controlled separately, and the evaporation temperature.
2.Kontroliruet speed and the coating by controlling the temperature in the evaporation chamber. Or added in the pre-feeding installation evaporation chamber in order to control the speed and time of deposition.
3. Use special technology of high-temperature bonding after prior evaporation. It does not condense in the pipe and clogging.
4. The furnace is equipped with a coating antioxidant coatings special sealed muffle furnace, minimizing contamination of by-products for the heating elements and insulating materials
5.Osnaschena special installation of branch removal of gases in the furnace. Environmental safety of gas processing.

Personal accessories

 
1.Dveri oven: door hinges / frame on wheels, manual locking / automatic ring seal.
2.Korpus furnace: full carbon steel / stainless steel interior / full stainless steel
3.Kamera furnace for vacuum coating: soft carbon felt / graphite felt soft / hard composite felt / the CFC
4.Nagrevatel, muffle: HIP-pressed graphite / graphite extruded high purity, high strength and high density / small sized graphite / carbon-carbon composite materials
5.Vakuumny pump and vacuum: Imported / Chinese brand
6.PLC: OMRON / SIEMENS
Temperature 7.Kontroller: SHIMADEN / EUROTHERM
8.Termopara: C type / S type / K type / N Type
9.Registrator oven for applying antioxidant coatings: paperless / paper; import / Chinese brand
10.Pirometr: two color / monochrome, CHINO / Raytek
11.HMI (interface): analog screen / touch screen / industrial computer
12.Elektricheskie elements: CHINT / SCHNEIDER / SIEMENS
13.Telezhka: roller loader / forklift

Model parameters for the oven and vacuum coating

 

Models and Options	AOC-0304	AOC-0406	AOC-0810	AOC-1012
deposition chamber size D × H (mm)	Φ300 × 400	Φ400 × 600	Φ800 × 1000	Φ1000 × 1200
Max. the temperature in the deposition chamber (℃)	1800	1800	1800	1800
Max. the temperature in the evaporation chamber (℃)	1000	1000	1000	1000
Temperature uniformity (℃)	± 3	± 5	± 7.5	± 7.5
Heating power in a deposition chamber (KW)	60	100	250	450
The ultimate vacuum in a cold oven (Pa)	10Pa / 5 × 10-3Pa	10Pa / 5 × 10-3Pa	10Pa / 5 × 10-3Pa	10Pa / 5 × 10-3Pa
The rate of increase of pressure (Pa / h)	0.5	0.5	0.5	0.5
The above specifications are subject to change according to the technological requirements of the customer, they are not the standards for the reception, detailed specifications will be confirmed in the technical proposal or contract.