Vacuum furnace for degreasing and sintering MIM products

Assigning a vacuum sintering furnace and degreasing

 
The furnace is designed for degreasing and sintering the product obtained by injection molding (MIM) from materials based on iron, stainless steel, titanium alloy, stainless steel, high speed steel, etc.

Technical features of industrial vacuum sintering furnace and degreasing

 
1. The special chamber design and ideal location of the heaters in the oven to get a good temperature uniformity.
2. Special degreasing chamber design with high integrity and a complete degreasing. Minimize contamination elements in the furnace heating chamber.
3. It has a function of slow evacuation, the low pressure sintering, sintering at a partial pressure degreasing under reduced pressure or low pressure.
4. Uses advanced thermal insulation structure and materials, with good insulation and less heat absorption, energy saving more than 20% compared to traditional construction.
5. Touch-screen control, PLC centralized control, simple operation, high reliability.
6. The vacuum sintering furnace and degreasing has an alarm function with pressure overload and overheating of the furnace, automatic mechanical protection against pressure, blocking function, and other features for high security
7. It has a remote control function, diagnostic alarm malfunctions, and software updates.

Personal accessories 
1.Dveri furnace: manual locking / automatic ring seal.
2.Korpus furnace: full carbon steel / stainless steel inside / full stainless steel
3.Kamera industrial vacuum sintering furnace and degreasing: Soft carbon felt + hard felt composite / full
hard composite felt
4.Nagrevatel: HIP-pressed graphite / punching graphite, high-purity,
high strength and high density
5.Mufel graphite small sizes
6.Pnevmaticheskoe control: volume flow meter / mass flow meter, manual / automatic valve, imported / Chinese brand
7.Vakuumny pump and vacuum: Imported / Chinese brand
8. Trolley vacuum sintering furnace and degreasing: Roller loader / forklift
9.HMI (interface): analog screen / touch screen / industrial computer
10.PLC: OMRON / SIEMENS
11.Kontroller temperature: SHIMADEN / EUROTHERM
12.Termopara: C type (with a cover made of tungsten / molybdenum

and / ceramics)
13.Registrator: paperless / paper; imported / Chinese brand
14.Elektricheskie elements: CHINT / SCHNEIDER / SIEMENS

The models and parameters of industrial vacuum sintering furnace and degreasing

 

options Models	IMDS-030306	IMDS-040408	IMDS-040415	IMDS-050520
The size of the working area W × H × D (mm)	300 × 300 × 600	400 × 400 × 800	400 × 400 × 1500	500 × 500 × 2000
Weight of load (exclusive volume)	150	250	500	1000
Max. Temperature (℃)	1550	1550	1550	1550
Temperature uniformity (℃)	± 3	± 3	± 5	± 5
Heating power (kW)	75	90	145	240
Ultimate vacuum (Pa)	1	1	1	1
The rate of pressure rise (Pa / h)	0.67	0.67	0.67	0.67
Gas for degreasing	Ar / N2	Ar / N2	Ar / N2	Ar / N2
These data are calculated in accordance with parameters of stainless steel products (MIM) sintering. They may vary according to the technological requirements of the customer, they are not the standards for the reception, detailed specifications will be confirmed in the technical proposal or contract.